LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Service Information) >> (55 Hood, Lids) >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

NOTE:

After complete removal of the gas-filled strut ensure correct positioning during installation: the gas-filled strut tube must be attached on the hood side.

-- Press gas-filled strut onto ball stud and engage.

scientia non olet · About LEMON Manuals