Upper Toothed Belt Guard, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the Reducing Agent Injector -N474-. Refer to Reducing Agent Injector -N474-, REMOVING AND INSTALLING .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Bleed the fuel system. Refer to FUEL SYSTEM, FILLING/BLEEDING .
Tightening Specifications:
- Refer to OVERVIEW - EXHAUST TEMPERATURE REGULATION
- Differential pressure sensor control line to toothed belt guard. Refer to OVERVIEW - TOOTHED BELT GUARD .
- Fuel Filter; Overview - Fuel Filter. Refer to OVERVIEW - FUEL FILTER .
- Refer to Fig 1