Overview - Toothed Belt Guard
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Lower Toothed Belt Guard
- Removing and Installing. Refer to LOWER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
- Bolt
- with collar
- mounted permanently in the lower toothed belt guard
- 12 Nm
- Bracket
- for coolant lines
- Bolt
- 5 Nm
- Pipe
- To the Differential Pressure Sensor -G505-
- Clip
- Bolt
- 5 Nm
- Bracket
- For the coolant lines and the reducing agent delivery line
- Heat Shield
- Bolt
- 5 Nm
- Bracket
- For the measuring tube
- Upper Toothed Belt Guard
- Removing and Installing. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
- Bolt
- Insert with locking fluid. Refer to the Parts Information.
- 12 Nm
- Rear Toothed Belt Guard
- For the removal, remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .