OVERVIEW - All Wheel Drive Control Module -J492-, GENERATION IV

Refer to ALL WHEEL DRIVE CLUTCH IDENTIFICATION

• For more information. Refer to Self Study Program; No. 414; 4MOTION with all wheel clutch generation IV.

Fig 1: All Wheel Drive Control Module Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. All Wheel Drive Control Module -J492-
   • Always replace together with valve
   • Is calibrated with Final Drive Clutch Control Valve -N373-
   • Removing and installing. Refer to All Wheel Drive Control Module -J492-, REMOVING AND INSTALLING GENERATION IV .
2. Bolt
   • 6 Nm
3. Cover
   • Always replace.
   • With vulcanized seal
   • Remains on the control module or on the all wheel drive clutch housing during removal
4. Final Drive Clutch Control Valve -N373-
   • Always replace together with control module
   • Is calibrated with All Wheel Drive Control Module -J492-
   • Removing and installing. Refer to All Wheel Drive Control Module -J492-, REMOVING AND INSTALLING GENERATION IV .
5. Seal
   • Always replace
   • Make sure the centering lip fits correctly in the groove
   • Coat with High Performance All Wheel Drive Clutch Oil and insert
6. Seal
   • Always replace
   • Diameter 12 mm
   • Coat with High Performance All Wheel Drive Clutch Oil and insert
7. Seal
   • Always replace
   • Diameter 11 mm
   • Coat with High Performance All Wheel Drive Clutch Oil and insert
8. Seal
   • Always replace
   • Diameter 10 mm
   • Coat with High Performance All Wheel Drive Clutch Oil and insert