Camshaft Adjuster, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings.

Fig 1: Bringing Cam Adjustment Actuators Into Installed Position

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

The engine could be damaged.

Bring all of the pins for all of the cam adjustment actuators into the installed position.

-- Press down the cam adjustment actuator pins -arrow- by hand.

The pins for all of the adjusting elements must not be in the outward position.

-- Install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .