Section 70 (4.0L - MULTIPORT Fuel Injection - Engine Code(S): CEUC & CRDB)
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- 24 MULTIPORT Fuel Injection
- General Information
- Releasing Pressure In High Pressure Area
- Specifications
- Fuel Injection System
- Vacuum System
- Connection Diagram - Vacuum System
- Vacuum System, Checking
- Wastegate Bypass Regulator Valve -N75-, Removing And Installing
- Secondary Air Injection Solenoid Valves -N112 - / -N320 -, Removing And Installing
- Intake Manifold Runner Control Valve -N316-, Removing And Installing
- Cylinder Head Coolant Valve -N489-, Removing And Installing
- Air Filter
- Intake Manifold
- Overview - Intake Manifold
- Throttle Valve Control Module Assembly Overview
- Intake Manifold, Removing And Installing
- Throttle Valve Control Module -J338-, Removing And Installing
- Intake Manifold Runner Position Sensor -G336-, Removing And Installing
- Intake Manifold Runner Position Sensor 2 -G512-, Removing And Installing
- Fuel Injectors
- Sensors
- Structure-Borne Sound Actuator -R214-, Removing And Installing
- Structure Borne Sound Control Module -J869-, Removing And Installing
- Fuel Pressure Sensor -G247-, Removing And Installing
- Fuel Pressure Sensor 2 -G624-, Removing And Installing
- Low Fuel Pressure Sensor -G410-, Removing And Installing
- Charge Air Cooler Temperature Sensors -G763 - / -G764-, Removing And Installing
- Intake Air Temperature Sensor -G42-, Removing And Installing
- Manifold Absolute Pressure Sensor -G71-, Removing And Installing
- High Pressure Pump
- Heated Oxygen Sensor
- Engine Control Module
- Special Tools