Right Flange Shaft, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Secure the transmission on the Engine And Transmission Holder VAS6095, refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Place the Used Oil Collection and Extraction Unit SMN372500 under the transmission.
-- Install the Lifting Eyebolt 3368 into a threaded hole in the right flange shaft.
-- Position the Slide Hammer Set VW771 with the VW771/13 on the Lifting Eyebolt 3368 and remove the flange shaft.