Rear Cover Plate, Removing And Installing, QUATTRO Vehicles: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Raise the vehicle.
-- Remove the wheels.
-- Remove the rear brake rotor. Refer to Removing .
-- Hang the brake caliper with the brake carrier on the body with wire.
CAUTION:
Do not let the brake caliper with the brake carrier hang on the brake hose. Do not support the weight with the brake hose.
WARNING:
Do not actuate the brakes or the electromechanical parking brake when the brake caliper is removed.
-- Remove the cover plate screws -1-.
-- Remove the cover plate -2-.