LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Rear Brakes, Steel, RS6/RS7, Pr-1KJ/1KQ >> Rear Brake Rotor, Removing And Installing >> Removing

Rear Brake Rotor, Removing And Installing : Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- If the same brake rotor is reinstalled with used brake pads, remove the brake caliper. Refer to Removing .

-- If the brake pads and rotor are being replaced, remove the brake pads. Refer to Removing .

-- Loosen the bolt -1- and remove the brake rotor.

Fig 1: Identifying Bolt
GWWA46-10302Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals