LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Front Brakes, Pr- 1LL/Fm0 >> Front Cover Plate, Removing And Installing >> Installing

Front Cover Plate, Removing And Installing : Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Mount the cover plate -1-.

-- Install the screws -arrows- and tighten to 10 Nm.

-- Install the brake rotor. Refer to Installing 

Make sure the brake hose is routed correctly. Make sure the brake hose is not blocked, bent or rubbing against the vehicle.

WARNING:

Make sure the brakes are working correctly before driving the vehicle for the first time.

After installing, press the brake pedal several times firmly to properly seat brake pads in their normal operating position.

Check brake fluid level, and fill if necessary.

scientia non olet · About LEMON Manuals