LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Exterior Body Panels (Hood, Lids)) >> (55 Hood, Lids) >> Hood >> Release Cable, Removing And Installing >> Routing the Release Cable inside the Engine Compartment

Routing the Release Cable inside the Engine Compartment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Release Cable Routing In Engine Compartment
GWWA55-10315Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2-, starting from the passenger compartment, inside the engine compartment and along the fender flange -3- as shown.

-- Push the grommet -1- into the A-pillar.

-- Slide the coupling -4- onto the lock carrier. Refer to Release Cable Coupling .

scientia non olet · About LEMON Manuals