Release Lever Cover, Removing And Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Release Lever
- >>A-Pillar<< Lower Trim
- Clip
- Press in completely, it must engage.
- Hood Release Lever Cover
- First disengage the cable from the coupling inside the engine compartment, refer to Release Cable Coupling .
- Pry the clip out of the hood release lever.
- Remove the cover sideways from the hood release lever.