Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Engage the operating cable -3- in the door lock operating lever -2-.
-- Insert the operating cable in the cable bracket -1- and rotate the lever -4- 90° -arrow-.
- The lever must engage audibly with the locking tab on the cable bracket.
-- Install the lock cylinder guide. Refer to Installing .
-- Install the inner door panel cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Install the door trim panel. .
-- Install the exterior door handle. Refer to Installing .