Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Transmission removed, refer to TRANSMISSION, REMOVING AND INSTALLING or TRANSMISSION, REMOVING AND INSTALLING .

-- Remove the spur gear unit, refer to SPUR GEAR DRIVE, REMOVING AND INSTALLING .

-- Remove the coolant pump, refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Remove the oil pan lower section, refer to Removing .

-- Place the Used Oil Collection and Extraction Unit SMN 372500 under the engine and leave it there for the following steps.

NOTE:

Oil escapes when removing oil pipes.

Fig 1: Identifying Oil Pipe Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the oil pipe.

-- Remove the bolt -arrow- and remove the intake tube.

Fig 2: Identifying Intake Tube With Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the oil pump.

Fig 3: Identifying Oil Pump & Bolts

Courtesy of AUDI OF AMERICA, LLC