LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.0L - Crankshaft & Cylinder Block - Engine Code: CPNB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Vibration Damper, Removing And Installing, Vehicles Without Torque Support >> Removing

Vibration Damper, Removing And Installing, Vehicles Without Torque Support: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation, refer to Noise Insulation .

-- Remove the ribbed belt, refer to Removing .

-- Remove the bolts -1- and then remove the shim -2- and the vibration damper -3-.

Fig 1: Identifying Vibration Damper Connection
GWWA13-10059Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals