Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damage due to reversed running direction on a used ribbed belt.
- Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.
-- Turn the tensioning element clockwise using the Torx Socket - T60 T40087 -arrow- to release the tension on the ribbed belt.
-- Remove the ribbed belt and secure the tensioning element with Locking Pin T10060A.