LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.0L - Crankshaft & Cylinder Block - Engine Code: CPNB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Vibration Damper, Removing And Installing, Vehicles With Torque Support >> Installing

Vibration Damper, Removing And Installing, Vehicles With Torque Support: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the bolts that were tightened with an additional turn.

Replace the shim.

-- Install the ribbed belt, refer to Installing .

-- Install the lock carrier cover, refer to Front Bumper .

scientia non olet · About LEMON Manuals