Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ribbed Belt

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Mount the ribbed belt over the pulley.

Generator
Idler Roller
Idler Roller
Coolant Pump
A/C Compressor
Ribbed Belt Tensioning Damper
Vibration damper

NOTE: When installing the ribbed belt, make sure it is seated correctly on the pulleys.

-- Start the engine and check the belt routing.