Balance Shaft, Removing And Installing: Removing

• The transmission is removed.

-- Remove the belt pulley side sealing flange, refer to Removing .

-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chain, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Stop the balance shaft at the rear of the engine with the Diesel Injection Pump Locking Pin 3359.

Fig 1: Identifying Diesel Injection Pump Locking Pin 3359 And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- at the rear of the engine and then remove the drive chain sprocket from the balance weight.

-- Loosen the bolt -arrow- at the front of the engine.

Fig 2: Identifying Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt and remove the balance weight from the balance shaft.

-- Remove the nut -arrow- at the rear of the engine and then remove the balance weight for the balance shaft.

Fig 3: Identifying Diesel Injection Pump Locking Pin 3359 And Nut

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the balance shaft bearing end bracket.

Fig 4: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the balance shaft back out of the cylinder block.