Balance Shaft, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crankshaft Holder 3242

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

Secure crankshaft -1- in "Top Dead Center (TDC)" position using Locking Pin For Crankshaft T40237.

NOTE: Replace the balance shaft.

-- Install camshaft timing chain, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Install the timing chain cover lower section, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Install the belt pulley side sealing flange, refer to Installing .