Seat Side Trim On Sill Panel Side, Removing And Installing, Front Seat (Manual): Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sill Side Trim -1-, Tab -2-, Retaining Bracket -3- And Locking Clips -4-

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

NOTE:

Make sure the tab -2- is seated correctly.

Make sure the sill side trim -1- is engaged correctly on the retaining bracket -3- and the locking clips -4- are closed.

Make sure the connectors are installed correctly and are secure.

Installation note: For example, tightening specifications and replacing components. Refer to OVERVIEW - SEAT PAN, SILL PANEL/TUNNEL SIDE SEAT SIDE TRIM and OVERVIEW - SEAT PAN, SEAT SIDE TRIM BRACKET ON SILL PANEL SIDE .