Front Seat Trim Bracket/Compressor/Control Module, Removing And Installing, MULTICONTOUR Seat: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the bracket for the front trim -arrows-. When doing this make sure the tabs -2- fit into the bracket -1, 3 and 4-.
Installation is performed in reverse order of removal, noting the following:
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
- Observe all measures when installing the front seat. Refer to Installing .