Massage Mat, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Route the pneumatic lines in the backrest cushion and connect them to the valve block.
-- Connect the pneumatic lines and give them a push again and then a final tug to see whether the coupling is locked in correctly.
-- Attach the bonding with double adhesive tape in the same location it was in when it was removed.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
- Observe all measures when installing the front seat. Refer to Installing .
Install in reverse order of removal.