LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Body Exterior - Bumpers) >> 63 Bumpers >> Rear Bumper >> Impact Member, Removing And Installing >> Impact Member, Removing And Installing, Vehicles With Trailer Hitch >> Installing

Impact Member, Removing And Installing, Vehicles With Trailer Hitch: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the bolts that are tightened with an additional turn.

-- Install the trailer hitch socket. Refer to TRAILER HITCH .

-- Install the rear bumper cover. Refer to INSTALLING .

scientia non olet · About LEMON Manuals