LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Body Exterior - Bumpers) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Headlamp Washer System Spray Nozzle Cover, Removing And Installing >> Removing

Headlamp Washer System Spray Nozzle Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Headlamp Washer System Spray Nozzle Cover
GWWA63-10503Courtesy of AUDI OF AMERICA, LLC

-- Remove the headlamp washer system spray nozzle. Refer to HEADLAMP SPRAY NOZZLE .

-- Expand the retainers -2- on the spray nozzle cover -1- with a screwdriver -arrows- and remove the spray nozzle -3-.

NOTE: Tabs will break off when expanding the retainers -4-.