LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Body Exterior - Bumpers) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Headlamp Washer System Spray Nozzle Cover, Removing And Installing >> Installing

Headlamp Washer System Spray Nozzle Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inserting Spray Nozzle Into Cover
GWWA63-10534Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Insert the spray nozzle -1- into the cover -2- as shown and then push on it in direction of -arrow- until it clicks into place.

-- Install the headlamp washer system spray nozzle. Refer to HEADLAMP SPRAY NOZZLE .