Suspension Strut, Removing And Installing, Air Spring Damper: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi A7 Quattro, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
During assembly work, make sure no pressure points form on the suspension strut boot.
-- First secure the air spring damper on the body.
-- Tighten the new nuts -arrows- diagonally.
-- Install the wheel, refer to WHEELS AND TIRES .
-- Air suspension system, filling, refer to SYSTEM, VENTING OR FILLING .
-- Re-adapt control position CONTROL POSITION, PROGRAMMING