Automatic Transmission Mount 0BK

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Automatic Transmission Mount 0BK Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .
Tunnel Crossmember
- Removing and Installing, refer to OVERVIEW - SUBFRAME MOUNT .
Stop
- For the transmission mount
Transmission Mount
- Removing and installing, refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH AUTOMATIC TRANSMISSION .
Bolt
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .
Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .
Transmission Support
- Removing and installing, refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH AUTOMATIC TRANSMISSION .
Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .
Nut
- Tightening specification, refer to OVERVIEW - SUBFRAME MOUNT .