LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (4.0L - Engine Assembly - Engine Code(S): CEUC & CRDB) >> 10 Engine Assembly >> Subframe Mount >> Transmission Mount, Removing And Installing >> Transmission Support With Transmission Mount, Removing And Installing >> Removing

Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

DSG Transmission 0B5: 

Fig 1: Identifying Bolts
GWWA34-10648Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember, refer to OVERVIEW - SUBFRAME MOUNT .

-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.

Automatic Transmission 0BK: 

Fig 2: Identifying Bolts
GWWA37-11131Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember, refer to OVERVIEW - SUBFRAME MOUNT .

-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.