LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> 8-Cylinder 4.0 TFSI Gasoline Engine >> Installing

8-Cylinder 4.0 TFSI Gasoline Engine: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Install new spark plugs according to the tightening specification.

-- Grease the ignition coils. Refer to IGNITION COILS, LUBRICATING .

-- Install the ignition coils loosely into the spark plug shaft.

-- Align the ignition coils with the connectors and attach all the connectors at the same time onto the ignition coils.

-- Press the spark plugs evenly onto the spark plugs by hand. Do not use a hammer.

Installation is the reverse of removal.

NOTE: Secure all hose connections with hose clamps that match current standard production.
scientia non olet · About LEMON Manuals