LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> Ignition Coils, Lubricating

Ignition Coils, Lubricating

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

NOTE: New ignition coils are delivered already lubricated. It is not necessary to lubricate them again.

-- Apply a thin bead of Spark Plug Grease G 052 141 A2 all around the sealing hose on the ignition coil -arrow-. The bead of lubricant must be 1 to 2 mm thick.

Fig 1: Applying Thin Bead Of Special Lubricant Around Ignition Sealing Hose
GWWN28-10079Courtesy of AUDI OF AMERICA, LLC