4-Cylinder 2.0L TFSI And 2.0L TFSI Hybrid Gasoline Engines: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Install new spark plugs according to the tightening specification.

-- Grease the ignition coils. Refer to IGNITION COILS, LUBRICATING .

-- Loosely place all ignition coils in spark plug shaft.

-- Align the ignition coils with the connectors -arrows- and connect all connectors to the ignition coils at the same time.

Fig 1: Connecting Connectors To Ignition Coils

Courtesy of AUDI OF AMERICA, LLC

-- Press the ignition coils evenly by hand onto the spark plugs (do not use a hammer).

Installation is the reverse of removal.