LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (4.0L - Cooling System - Engine Code(S): CEUC & CRDB) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Coolant Pipe, Removing And Installing >> Removing

Right Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Clamp, Bolt And Nut
GWWA19-11429Courtesy of AUDI OF AMERICA, LLC

-- Remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the housing for the charge air cooler, refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .

-- Loosen the clamp -1- and remove the coolant hose.

-- Remove the bolt -3- and the nut -2- and then remove the right coolant pipe from the cylinder head.