LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (4.0L - Turbocharger & Supercharger - Engine Code(S): CEUC & CRDB) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler Housing, Removing And Installing >> Installing

Charge Air Cooler Housing, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the Throttle Valve Control Module -J338-, refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING => Filling .

scientia non olet · About LEMON Manuals