LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Battery, Starter & Generator) >> Electrical System (27 Battery, Starter, Generator, Cruise Control) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Nm
Battery Holddown - 18
Battery Jump Start Terminal Mount - 4
Battery Jump Start Pin - 9
Generator Bolts2 - 20
Generator Bolts3 - 23
Generator Coolant Pipe Clamp Bolt3 - 9
Generator Threaded Pin - 10
Generator Threaded Pin Nut - 20
Generator B+ Terminal Nut - 16
Main Fuse Panel at Battery - 5
Negative Battery Terminal - 5
Starter B+ Terminal - 20
Tool Kit Retainer - 18
Wiring Harness Bracket 1 - 40