Battery Jump Start Terminal And Positive Terminal Grip Overview
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Bracket
- Quantity 2
- Nut
- 40 Nm
- For wiring harness bracket
- Nut
- Wiring Guide
- With holder.
- Battery Jump Start Terminal -U6-
- Positive terminal grip with wiring harness
- Removing and installing, refer to BATTERY JUMP START TERMINAL .
- Mount
- For the Battery jump start terminal -U6-
- Removing and installing, refer to BATTERY JUMP START TERMINAL MOUNT .
- Screw
- 4 Nm
- Quantity 2
- Cover
- For the wiring harness.
- Terminal 30 Wire Junction -TV2-
- Overview, refer to TERMINAL 30 WIRE JUNCTION .
- Remote Start Connection
- 9 Nm
- Negative terminal clamp.
- Terminal B+
- To the starter.
- Electrical Connector
- To the starter.
- Terminal 30/B+
- To the generator.
- Ground Wire
- On the engine support.
- Nut
- Electrical Connector
- To the generator.
- Connectors
- On the radiator fans.