Air Intake Duct, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is done is reverse order, observe the following:
-- Insert the air intake duct on the guide -E- so that the securing tab lock into the mount.
-- Tighten the bolts -A- to the tightening specification, refer to OVERVIEW - HEATER AND A/C UNIT AIR INTAKE HOUSING .
-- Install the air intake housing, refer to AIR INTAKE MANIFOLD, REMOVING AND INSTALLING .