LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Heating, Ventilation & Air Conditioning (Actuators - Front Heater And A/C Unit)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Auxiliary Heater Heating Element -Z35-, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Clean the heating element area in the shaft before installing.

After completing the repair work, perform the following operations on the control head using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function:

-- Check the Diagnostic Trouble Code (DTC) memory and delete any currently displayed entries.

-- Check the activation and the functionality via the Engine Control Module (ECM).

scientia non olet · About LEMON Manuals