Overview - Power Take-Off: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Spur Gear Unit
- Do not disassemble
- Removing and installing. Refer to SPUR GEAR DRIVE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to figure in Tightening Specifications .
- Shaft Seal
- Always replace. Refer to POWER STEERING PUMP DRIVE SEAL, REPLACING .
- Shaft Seal
- Always replace. Refer to A/C COMPRESSOR DRIVE SEAL, REPLACING .
- For A/C compressor drive
- Clamp
- Protective Dust Cap
- For A/C compressor drive
- Input Shaft
- For A/C compressor
- Tightening specifications. Refer to OVERVIEW - A/C COMPRESSOR POWER UNIT .
- Cover
- Input Shaft
- For the oil pump
- O-Ring
- Always replace