Overview - ATF Circuit: Notes
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- ATF Cooler
- Refer to ATF COOLER, REMOVING AND INSTALLING
- Bolt
- 9 Nm
- Bracket
- For the ATF cooler
- Cover
- 8 Nm
- For the replaceable ATF filter
- Different versions depending on the date of manufacture, pat attention to the correct allocation.
- O-ring
- Always replace
- Coat with ATF before installing
- Cover
- Bolt
- 20 Nm
- O-rings
- Always replace together with the ATF pipe (-item 9- OVERVIEW - ATF CIRCUIT => List Item:ATF Pipes)
- Coat with ATF before installing
- ATF Pipes
- Replacing. Refer to ATF FILTER HOUSING, REMOVING AND INSTALLING .
- O-rings
- Always replace
- Coat with ATF before installing
- For the Replaceable ATF Filter Housing
- Always replace after removing
- Different versions depending on the date of manufacture, pat attention to the correct allocation.
- Refer to ATF FILTER HOUSING, REMOVING AND INSTALLING
- Bolt
- 10 Nm
- ATF Filter
- Refer to ATF FILTER, REMOVING AND INSTALLING
- ATF Pipe/Hose Line
- Replacing. Refer to ATF PIPES, REMOVING AND INSTALLING .
- Cleaning. Refer to CLEAN - (ATF PIPES, REMOVING AND INSTALLING).
- Bolt
- 20 Nm
- ATF Pipe/Hose Line
- Replacing. Refer to ATF PIPES, REMOVING AND INSTALLING .
- Cleaning. Refer to CLEAN - (ATF PIPES, REMOVING AND INSTALLING).
- Bolt
- 8 Nm
- O-rings
- Always replace
- Coat with ATF before installing
- O-rings
- Always replace
- Coat with ATF before installing