LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fuel Injection System (Diesel - General & Service Information - TDI 3.0L - CPNB)) >> 23 Diesel Fuel Injection >> Intake Manifold >> Intake Flap Motor -V157-, REMOVING AND INSTALLING >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the oil dipstick tube, tighten the bolts to 9 Nm .

-- Install the EGR pipe, refer to OVERVIEW - EXHAUST GAS RECIRCULATION .

scientia non olet · About LEMON Manuals