Muffler, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the crossbrace. Refer to MOLDING/TRIM/EXTENSIONS/TRIM PANELS . .
-- If equipped remove the diagonal brace. Refer to OVERVIEW - SUBFRAME, VEHICLES WITH FWD .
CAUTION:
The decoupling elements in the front muffler could be damaged.
- Do not bend decoupling elements in front muffler more than 10°.
-- Loosen the clamping sleeves -1 and 2- and slide them toward the rear.
-- Tie up the front muffler to the underbody.
-- Disconnect the left and right connector -3-.
WARNING:
Risk of accident due to the weight of the muffler.
- To remove the muffler a second technician is required.
-- Remove the bolts -1 and 2- and then remove the muffler.