Charge Air Cooler, Removing And Installing: Removing
- Supercharger secured on the :VAS6095A for repair work. Refer to SUPERCHARGER, SECURING TO ENGINE/TRANSMISSION HOLDER FOR REPAIR WORK .
-- Remove the bolts -arrows-, and remove the bracket -1- with the bypass valves.
Left Charge Air Cooler
-- Remove the Charge Air Pressure Sensor 2 -G447-. Refer to CHARGE AIR PRESSURE SENSOR - G31- / -G447-, REMOVING AND INSTALLING .
Right Charge Air Cooler
-- Remove the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .
-- Remove the Charge Air Pressure Sensor -G31-. Refer to CHARGE AIR PRESSURE SENSOR - G31- / -G447-, REMOVING AND INSTALLING .
Continued For Both Sides
-- Remove the bolts -1 and 2- and the coolant pipes from the supercharger.
-- Remove the bolts on the left -1 and 2- and right -3 and 4- charge air coolers.
-- Attach the :2036 to the supercharger with :2036/1 as illustrated.
-- Position the :2033 on the front of the charge air cooler.
-- Slowly remove the charge air cooler with even pressure from the supercharger housing using the :VAG1942 .