Sunroof Frame, Removing And Installing, A4 AVANT: Installing

-- When inserting the sunroof frame, pay attention to the sliding sunroof seal in the roof opening.

-- Have the two people assisting bring the sunroof frame into its installation position and install the nuts -3 and 7- until they stop.

-- Align the sunroof frame with the markings made during removal.

-- Tighten the nuts in the sequence -1 through 9-.

Further installation is performed in reverse order of removal, while noting the following:

-- Perform an adaptation. Refer to SUNROOF MOTOR -V1-, PROGRAMMING .