Sunroof Motor -V1-, Programming

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Body
• Body Assembly
• 01  - OBD-capable systems
• CA  - Power Sunroof Control Module J245
• CA  - Power Sunroof Control Module J245 Functions
• CA  - Basic Setting
• CA  - Power Sunroof Control Module J245, no sliding sunroof basic setting

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.