Height Adjustment
- To achieve the best possible exterior optical characteristics, make sure that the adjustment on left and right sides is performed as evenly (symmetrically) as possible.
-- Check the glass panel adjustment using a depth gauge, for example.
-- To adjust the height, close the sliding sunroof from the open position (not tilted open).
-- Remove the left and right boot. Refer to BOOT, REMOVING AND INSTALLING .
-- Loosen the left and right bolts -arrows-.
-- Adjust the glass panel in the front area and tighten the front bolts.
-- Adjust the glass panel in the rear area and tighten the rear bolts.
-- Then tighten the bolts in the center.
-- Perform an adaptation. Refer to SUNROOF MOTOR -V1-, PROGRAMMING .