Overview - Bumper Cover, A5 S Line, S5
- Bumper Cover Lower Section
- Removing and Installing. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING .
- Bolt
- 2 Nm
- Rear Reflector
- Removing and Installing. Refer to REFLECTOR, REMOVING AND INSTALLING .
- Spring
- For rear reflector
- Bolt
- 2 Nm
- Mount
- For lane change assistance control module
- Overview. Refer to OVERVIEW - LANE CHANGE ASSISTANCE .
- Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - LANE CHANGE ASSISTANCE .
- Bolt
- 2 Nm
- Bolt
- Quantity: 3
- Tightening Specification OVERVIEW - BUMPER COVER MOUNT
- Mount
- For the bumper cover
- Side
- Overview. Refer to OVERVIEW - BUMPER COVER MOUNT .
- Mount
- For securing the bumper cover
- Overview. Refer to OVERVIEW - BUMPER COVER MOUNT .
- Locking Mechanism
- For attaching the rear bumper cover to the upper mount
- Bolt
- Quantity: 2
- Tightening specification OVERVIEW - BUMPER COVER MOUNT
- Nut
- 4 Nm
- Quantity: 4
- Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Cover
- For the towing eye
- Trim
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER TRIM, REMOVING AND INSTALLING, A5 S LINE, S5 .
- Right Trim Molding
- Equipped on some models
- Removing and Installing. Refer to BUMPER COVER TRIM MOLDING, REMOVING AND INSTALLING, S5 .
- Center Trim Molding
- Equipped on some models
- Removing and Installing. Refer to BUMPER COVER TRIM MOLDING, REMOVING AND INSTALLING, S5 .
- Left Trim Molding
- Equipped on some models
- Removing and Installing. Refer to BUMPER COVER TRIM MOLDING, REMOVING AND INSTALLING, S5 .
- Nut
- 2 Nm
- Quantity: 2