Overview - Bumper Cover, A4 S Line

Fig 1: Exploded View Of Rear Bumper Cover, A4 S Line

Courtesy of AUDI OF AMERICA, LLC

Bumper Cover Lower Section
- Removing and Installing. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING .
Rear Reflector
- Removing and Installing. Refer to REFLECTOR, REMOVING AND INSTALLING .
Spring
- For rear reflector
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Overview - Bumper Cover Mount. Refer to OVERVIEW - BUMPER COVER MOUNT
Expanding Rivet
- Quantity: 2
Intermediate Piece
- For securing the wheel housing liner
Bolt
- 2 Nm
Bolt
- 2 Nm
Mount
- for lane change assistance control module
- Overview. Refer to OVERVIEW - LANE CHANGE ASSISTANCE .
Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - LANE CHANGE ASSISTANCE .
Nut
- 4 Nm
- Quantity: 4
Cover
- For the towing eye
Trim
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER TRIM, REMOVING AND INSTALLING, A4 S LINE .
Bolt
- 2 Nm
- Quantity: 2
Nut
- 2 Nm
- Quantity: 2