Windshield, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Prepare the undamaged window glass for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the new window glass for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

-- Insert the windshield into the window opening using two suction lifters and align it on the sides.

Distance from the window edge to the roof frame -Item 1- OVERVIEW - WINDSHIELD List Item:Windshield.
Secure the window to the top of the roof with adhesive tape.

-- Before installing the plenum chamber cover, first remove the protective profile -2- from the frame OVERVIEW - WINDSHIELD .

-- Observe the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

: Depending on the version, the following additional procedures are required.

-- Calibrate the driver assistance systems front camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA .