Minimum Curing Times For Bonded Windows
WARNING: This page is about a different variant/trim than selected.
- For safety reasons, use only non-conductive two-part adhesive when installing windshield and rear window with the materials listed below.
- The vehicle can only be used after the minimum curing time has elapsed.
- During the minimum curing time, the vehicle must be resting at room temperature (at least 15 °C (59 °F)) on a level surface.
| Window Type | Vehicle | Adhesive Sealant | Minimum Curing Time in Hours |
|---|---|---|---|
| Windshield | With airbag | Two-Part Window Adhesive Kit:D 004 660 M2 | 2 |
| Rear Window | Two-Part Window Adhesive Kit:D 004 660 M2 | 2 | |
| Side Windows | One-Part Window Adhesive:DH 009 100 03 | 3 |